Science Spotlight

A long, wet winter has been good for Junction Reservoir and CDFW’s Kamloops rainbow trout that live there.


The June Lake Marina graciously offered up its net pens to CDFW’s Kamloops rainbow trout program when the drought forced CDFW to rescue its brood stock from a shrinking Junction Reservoir.


CDFW hatchery staffers Jimmy Sparks, left, and Drew Klingberg prepare to sex and sort Kamloops brood stock for later spawning, separating males from females as well as those females ready to spawn immediately versus those that need more time to ripen. The fish are returned to Junction Reservoir after spawning.


The offspring from these Kamloops will be raised at CDFW’s Fish Springs Trout Hatchery and stocked by airplane as fingerlings into backcountry waters across the state approved for trout stocking.


Resplendent in their spring spawning colors, Kamloops rainbow are raised and bred for their hard-fighting ability and wild nature that allows them to thrive in California’s remote backcountry waters and provide a thrill for anglers who catch them.

Junction Reservoir in Mono County is CDFW’s brood lake for the Kamloops rainbow trout, a hard-fighting strain originally from the Kamloops region of British Columbia.

The 20-acre lake sits on a private cattle ranch off-limits to fishing. It provides a secluded setting for the brood stock, whose progeny are used almost exclusively for the aerial stocking of backcountry waters throughout the state.

“We try to keep them raised in a more wild condition so they do better in the wild,” said Hot Creek Trout Hatchery Manager Mike Escallier. “They are a really fun fish to catch. They jump a lot. They will jump 3 feet out of the water when you hook one.”

And Junction Reservoir has never looked better. This spring, the lake was filled to the brim after a long, cold, wet winter. Near the mouth of the lake’s one small inlet, Kamloops were staging for a spawning run, their feisty nature on full display in the clear waters, breaking the surface occasionally and fighting each other over territory.

Kamloops further up the inlet were blocked from moving upstream by a concrete and metal trap. That’s where CDFW’s hatchery staff collect and sort the fish each spring, spawning them manually to produce the offspring that will be deposited as fingerlings this summer by airplane into backcountry waters approved for stocking.

The entire scene is a welcome sight after California’s drought nearly collapsed CDFW’s backcountry fish-stocking program. During the darkest days of the drought, the small inlet feeding into Junction Reservoir dried up. Combined with the years-long shortage of rain and snow, Junction Reservoir withered to about half its size. In 2013, CDFW conducted an emergency fish rescue to save about 2,000 of the brood fish and its backcountry trout stocking program altogether.

The rescued fish were relocated to CDFW trout hatcheries and other nearby waters for safe-keeping. The owners of the June Lake Marina provided a major assist, offering up some of their net pens on June Lake to CDFW and its Kamloops at no charge. The June Lake net pens continue to hold some Kamloops, which CDFW spawns each spring until the program transitions back fully to Junction Reservoir and CDFW’s Fish Springs Trout Hatchery south of Big Pine where the baby Kamloops are raised.

CDFW returned brood fish to Junction Reservoir in the spring of 2017 following a wet winter and heavy snowpack. CDFW is rebuilding production toward its annual goal of collecting and fertilizing 1.4 million eggs. Some of the offspring are put back into Junction Reservoir to add genetic diversity and different age classes to the rebuilding brood population as no natural spawning occurs in the lake.

One benchmark hatchery managers and biologists are striving toward is the return of Kamloops to Crowley Lake, where more anglers will have a chance to enjoy them.

Before the drought wreaked havoc on CDFW’s Kamloops program, a portion of the Kamloops produced each year were allocated to Crowley Lake. While the backcountry trout are sterile – or “triploid” – the fish stocked into Crowley are “diploids” capable of spawning naturally.

“They spawn at different times than other strains of rainbow trout,” explained Escallier. “They give anglers fishing the creeks opportunity. They tend to be running up the creeks from Crowley right around the trout opener.”

CDFW Photos. Top Photo: The inlet to Junction Reservoir is blocked by a fish trap where CDFW hatchery employees catch fish in the spring for spawning.

###

Media Contact:
Peter Tira, CDFW Communications, (916) 322-8908

Brush habitats were created and put into Lake Perris to provide fish with habitat to feed and reproduce. The habitats will be completely submersed when the lake is filled to capacity.


The exposed lakebed gave CDFW fisheries biologists the opportunity to safely construct different kinds of habitat for the fish in Lake Perris.


Rock Reefs and Spawning gravel areas have been created and placed in more than 100 places around Lake Perris that will be utilized once the lake is returned to full capacity.


Rock Reefs constructed along the shore of Lake Perris, most about 1,000 square feet provide cover for juvenile fish and forage species.


135 Pipe Caves were constructed from PVC pipe and will provide spawning habitat for catfish.


Biologists created about 1,500 brush habitats in hundreds of locations on the banks of Lake Perris and in accessible locations further into the lake.


Biologists created about 1,500 brush habitats in hundreds of locations on the banks of Lake Perris and in accessible locations further into the lake.

More than a decade ago, Southern California freshwater anglers were disappointed to see a tried-and-true fishing spot dramatically affected by an emergency lake drawdown. Due to seismic concerns with the Perris Dam, California Department of Water Resources (DWR) officials deemed it necessary to reduce the water level at Lake Perris near Riverside by several thousands of acre-feet.

The drawdown exposed about 25 feet of bank around the perimeter of the lake. Since water was not going to be available for years while the dam was assessed and repaired, CDFW embarked upon a fisheries habitat mitigation project (funded by DWR) to create new fish habitat in the remaining water and the now exposed lakebed.

The project had two phases. The first was to immediately create fisheries habitat in the drawn-down portion of the lake in order to maximize use of the remaining water. The second was to build new habitats on the temporarily exposed areas, with the hope of benefitting both sport-fish species and anglers when the lake is eventually refilled. 

After 12 years, both phases are nearly completed.

After the initial water level reduction, teams from CDFW and DWR began working to prevent the immediate collapse of the lake’s fishery. The initial work, which took three years, involved the creation and placement of about 400 fish habitats made of recycled Christmas trees and citrus limbs. The man-made shelters ensured the fish would have places to hide and reproduce.

After the initial triage, CDFW biologists began to place additional habitats into the remaining water of Lake Perris. These habitats, made of thousands of tree trunks, citrus limbs and whole tree stumps would eventually give the lake’s fish an additional 1,500 refuges for safety. 

The citrus limbs were drilled with a ½” hole in the base and multiple limbs were tied together as compactly as possible and attached to a concrete block with polypropylene ropes to weigh them down. They were then placed strategically in different parts of the lake. These citrus habitats should provide cover for the warm water fish for at least 10 - 15 years.

Due to their bulk, increased buoyancy and weight, the single tree stumps were placed individually around the lake and weighted down with concrete blocks to keep them anchored.

Because the lake will be refilled to capacity once dam repairs are complete, it is important that the scientists are able to carefully track each habitat location. They worked in quadrants, placing 20 - 60 bundles into each to create “communities.” The grouped communities increase localized productivity of the warm water fish native to the lake and contribute to maintaining the warm water fisheries while the lake is in its reduced capacity. Each of the quadrant’s corners was marked with GPS, enabling scientists to record and monitor data specific to each location. 

The second phase of the project was the implementation of a Fishery Habitat Plan for the exposed lakebed above the drawn-down area. The implementation of the plan is a requirement of the Lake and Streambed Alteration Agreement between CDFW and DWR.

As with the below-water work that had already been completed, CDFW scientists carefully planned what kinds of habitat to create, what materials to use and where to place them in the open, exposed lakebed in order to provide the best environments for fish when the lake was fully restored. Areas were selected for habitat placement based on accessibility, proximity to existing natural habitat directly affected by the water reduction, avoidance of areas utilized for construction activities, distance from swimming areas and consideration of boating hazards.

Multiple types of habitats were designed and installed in Lake Perris, including:

• Brush habitats. Similar to the citrus branch habitats already placed in phase one, these brush habitats add to the terrestrial vegetation growth that has thrived in the lakebed since initial triage efforts began in 2006.
• Pipe caves constructed from 12” diameter PVC pipes. Approximately 4 feet long and capped at one end with concrete, these will provide spawning habitat for catfish that was lost when the lake was drawn down. A total of 135 pipe caves were placed around the rock reefs and terrestrial vegetation and will allow the young catfish to disperse into favored rearing habitat.
• Rock reefs were created from 226 dump truck loads of material stockpiled by DWR from a nearby rock quarry. These rock piles cover about 110,000 square feet of the lakebed -- about the size of two football fields. Staff created 109 rock reefs, each about 1,000 square feet (about the size of an average home lot). These provide cover for juvenile fish and forage species (such as crayfish) as well as spawning habitat and foraging areas for adult fish. Their placement is designed to allow fish to transition from deeper waters to shallower waters -- and vice-versa -- when the lake returns to normal operating levels.
• Spawning gravel areas. Thirty of these were created from suitable bottom composition for sunfish, bass, bluegill, etc. to spawn on and around. Almost 200,000 square feet of gravel bed habitat are now in the shallowest areas of the lake, adjacent to rock reefs or terrestrial vegetation that will be covered once the lake refills.
  
  After years of cooperative work Lake Perris is nearly ready to be refilled and with the thousands of new and improved habitats local anglers will be shouting “fish on” for decades to come. 

CDFW Photos. Top Photo: Citrus tree stumps, weighted down with concrete blocks to keep them anchored were placed individually around Lake Perris to create small habitats called communities.

# # #